ผู้เขียน : Bev

อัพเดท: 16 ต.ค. 2022 10.43 น. บทความนี้มีผู้ชม: 168 ครั้ง

If you need to replace a kitchen faucet valve, there are a few simple steps that you need to follow.

Kitchen Faucet Valve Replacement

First, make sure that you turn off the water supply at the main valve. Then, lift the faucet handle and uncover the stem of the ball valve or the dome-shaped cap. If you see a metal clip in the center of the stem, unscrew it.

Use a hair dryer

If the screw has fallen off, you can use a hair dryer to loosen it up. Once you've done that, you can use a pair of locking pliers to turn the valve back to the Off position. Be careful not to twist the valve too tightly, since too much pressure can break it or the supply line. Also, make sure that you turn off the water supply to prevent water from shooting out.

Kitchen Design

Remove the handles

To install the new valve, first remove the handles of the faucet. You should be able to unscrew the bonnet using a screwdriver or Allen wrench. Next, loosen the mounting nut with a large adjustable wrench. Lastly, unscrew the valve from the valve body. Then, feed the faucet's line through the hole. Make sure it's properly positioned and attached to the brackets underneath the counter. Double-check everything from above to make sure that everything is secure. If it's still leaking, check it again to make sure that it isn't coming loose. While it might seem like a hassle, a faucet valve replacement can be a simple DIY

project.  Call a plumbing supply specialist

You can also call a plumbing supply specialist for a replacement part. These specialists are an excellent source of faucet parts. You can also purchase cartridge-style faucet parts by calling the manufacturer. Before removing the faucet valve, remove the metal handle adapter and the plastic pivot stop. Remove the retainer nut with the tip of a screwdriver. Alternatively, you can use pliers to remove the brass retainer clip. If you're unable to handle this project alone, call a plumber. If the problem isn't obvious, a small leak may not be an immediate emergency, but a slow drip can lead to serious damage over time. If the faucet leaks, you should fix it right away rather than risk the problem worsening.


When replacing a kitchen faucet valve, it's important to know what you're dealing with. You need to find the part that's right for your model. Many faucets have a variety of valves, but one will fit perfectly. To ensure that the replacement part is right for your model, you'll need to make sure that it's a high-quality aftermarket product. Shut off the water Before beginning a commercial tap valve replacement, shut off the water to the existing faucet. Then, locate the On/Off valve, which controls both the cold and hot water supply lines. This valve is connected to the underside of the faucet.

บทความนี้เกิดจากการเขียนและส่งขึ้นมาสู่ระบบแบบอัตโนมัติ สมาคมฯไม่รับผิดชอบต่อบทความหรือข้อความใดๆ ทั้งสิ้น เพราะไม่สามารถระบุได้ว่าเป็นความจริงหรือไม่ ผู้อ่านจึงควรใช้วิจารณญาณในการกลั่นกรอง และหากท่านพบเห็นข้อความใดที่ขัดต่อกฎหมายและศีลธรรม หรือทำให้เกิดความเสียหาย หรือละเมิดสิทธิใดๆ กรุณาแจ้งมาที่ เพื่อทีมงานจะได้ดำเนินการลบออกจากระบบในทันที